How to save system state, options, calibrations files and more. This step-by-step guide details how to backup your CT scan through USB, DVD, and MOD storage devices.
CT USB Save State Procedure – GE
The system state USB should first be located and inserted into the SCSI tower USB port.
Once the indicator LED activates, the service icon located in the upper left corner of the CT system (on the right-side monitor) should be clicked.
The service browser will then open, and the “Utilities” tab at the top of the browser should be selected, followed by selecting “System State USB.”
A new window will appear, allowing customization of the state files to be saved to the USB. Users may choose the “Protocol” option to save only the CT protocols or select “All” to save the entire system state file.
The procedures for saving the protocol or system state to the USB typically take between 5 to 10 minutes to complete.
Upon completion, the system will display a confirmation message. At this stage, the “Cancel” button should be clicked, followed by the “Dismiss” button to close the save system state window.
Finally, the USB should be removed from the SCSI tower and labeled with the date of the save and any pertinent notes.
Related resources
The information provided by MRIPETCTSOURCE (“we,” “us,” or “our”) on https://www.medicalimagingsource.com (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.